SILVA, JOSE E.R. da; DOMINGOS, DOUGLAS B.; TEIXEIRA e SILVA, ANTONIO. Fuel miniplate thickness measurement system for dispersion fuel swelling evaluation. In: INTERNATIONAL NUCLEAR ATLANTIC CONFERENCE; MEETING ON NUCLEAR APPLICATIONS, 9th; MEETING ON REACTOR PHYSICS AND THERMAL HYDRAULICS, 16th; MEETING ON NUCLEAR INDUSTRY, 1st, September 27 - October 2, 2009, Rio de Janeiro, RJ. Proceedings... Sao Paulo: ABEN, 2009, 2009.
COSTA, PRISCILA; RAELE, MARCUS P.; SAMAD, RICARDO E.; MACHADO, NOE G.P.; VIEIRA JUNIOR, NILSON D.; GENEZINI, FREDERICO A.. Femtosecond pulsed laser deposition of a boron thin film aiming at the development of a low-cost neutron detector. In: KAIERLE, STEFAN (Ed.); HEINEMANN, STEFAN W. (Ed.) HIGH-POWER LASER MATERIALS PROCESSING: APPLICATIONS, DIAGNOSTICS, AND SYSTEMS, 7th, January 27 - February 01, 2018, San Francisco, California, USA. Proceedings... Bellingham, WA, USA: Society of Photo-optical Instrumentation Engineers, 2018. p. 105250J-1 - 105250J-7. (SPIE Proceedings Series, 10525).
DOI:
10.1117/12.2285896
Abstract: Boron thin films were produced using femtosecond pulsed laser deposition aiming at the development of a neutron
detector. As neutrons have no charge, in order to detect this particle converter materials are applied, promoting nuclear
reactions that result in the emission of charged particles, allowing the neutrons presence to be indirectly inferred. Among
the possible conversion materials, 10B has a considerable cross section for thermal neutrons and accessible cost.
Furthermore, the nuclear reaction produces easily detectable alpha particles, making it a rational option to develop a low
cost and portable neutron detector. The boron ablation threshold fluence has been measured by the Diagonal Scan (Dscan)
technique that resulted in the minimum laser energy value of 17.7 (6) μJ and fluence of 5.63(19) J/cm2. Boron
deposition was performed varying the pulse energy and deposition duration. The growth rate, morphological and
physical aspects of the boron pulsed laser deposition were characterized by a Scanning Electron Microscope and an
optical profilometer. The films surfaces have a flaky aspect with eventual droplets which had decayed overtime to a
more smooth surface. The studied parameters allowed producing a boron coating with the optimal thickness in order to
minimize self-absorption effect in the film, thus increasing efficiency.
KUNIOSHI, C.T.; CORREA, O.V.; LIMA, N.B.; RAMANATHAN, L.V.. Desenvolvimento de ligas metalicas amorfas Fe-Cr-P por eletrodeposicao. In: CONGRESSO BRASILEIRO DE ENGENHARIA E CIENCIA DOS MATERIAIS, 13.; SEMINARIO DE MATERIAIS PARA O SETOR ELETRICO, 6., 6-9 dez., 1986, Curitiba, PR. Anais...
1986. p. 576-586.Observação: arquivo não disponível no Repositório
ZEVALLOS CHAVEZ, J.Y.; PIRES, C.A.; GENEZINI, F.A.; ZAHN, G.S.; CRUZ, M.T.F.. Study of the inactive layer of a germanium detector: experimental and Monte Carlo simulation treatments. In: INTERNATIONAL NUCLEAR ATLANTIC CONFERENCE; ENCONTRO NACIONAL DE APLICACOES NUCLEARES, 7th, ago. 28 - set. 2, 2005, Santos, SP. Anais... Sao Paulo: ABEN, 2005, 2005.
CARDENAS, JOSE P.N.; MADI FILHO, TUFIC; PETRI, ANNA R.; SANTOS, ROBINSON A. dos; MARTINS, JOAO F.T.; CARVALHO, DIEGO V.S.; ALVARENGA, T.; BELLEZZO, M.; LARANJO, G.; LIMA, M.; OLIVEIRA, P.; PEREIRA, MARIA da C.C.. Experimental and MCNP studies of paraffin and polyethylene in neutron moderation and BF3 detector efficiency. In: INTERNATIONAL CONFERENCE ON ADVANCEMENTS IN NUCLEAR INSTRUMENTATION, MEASUREMENT METHODS AND THEIR APPLICATIONS, 3rd, June 23-27, 2013, Marseille, France. Proceedings... Piscataway, NJ: IEEE, 2013. Abstract: The Nuclear and Energy Research Institute – IPEN, offers post-graduate programs, namely: Nuclear Technology - Applications (TNA), Nuclear Technology - Materials (TNM), Nuclear Technology - Reactors (TNR). The Institute programs mission is to form expert technicians and engineers with a strong knowledge in their discipline to work in the nuclear area.
The course: “Theoretical Fundaments and Practices of the Instrumentation used in Nuclear Data Acquisition” covers the use of laboratory nuclear instrumentation and the accomplishment of experiments to obtain nuclear parameters.
One of these experiments is object of this work: “Experimental and MCNP Studies of Paraffin and Polyethylene Neutron Moderation and BF3 Detector Efficiency”.
Neutrons are uncharged particles and, therefore, cannot be detected by Coulomb interactions. Thus, the detector assembly used must contain some kind of material with high cross section for interaction with neutrons, called converters. A boron trifluoride (BF3) detector was used in this experiment to detect neutron in real time.
However, the response of this arrangement varies according to the energy range of incident neutrons. Their efficiency for thermal neutrons is above 90%, but, this result decreases, significantly, for neutrons of energy greater than 0.5 eV. The neutron moderation and, consequently, its energy variation were obtained by interposing different thicknesses of moderator material (Paraffin or Polyethylene) between the source and the detector.
ANGELOCCI, LUCAS V.; NOGUEIRA, BEATRIZ R.; ABREU, RODRIGO T.; ZEITUNI, CARLOS A.; ROSTELATO, MARIA E.C.M.. End-weld thickness variation effects on dose rate for a new ir-192 brachytherapy source. In: INTERNATIONAL NUCLEAR ATLANTIC CONFERENCE, October 21-25, 2019, Santos, SP. Proceedings... Rio de Janeiro: Associação Brasileira de Energia Nuclear, 2019. p. 198-206.Abstract: Brachytherapy is a form of radiation therapy that uses small sealed sources close to the tumor to deliver a high dose to target while keeping dose on neighboring healthy tissues as low as possible. A wide variety of radionuclides and different sources are available for brachytherapy, each with his own unique geometry. The Laboratory of Sources Production for Radiotherapy (IPEN/CNEN) developed a new Ir-192 seed for eye tumor treatment that is currently under dosimetric definition. This work is part of a larger project that aims the full dosimetry of this new source, but rather than calculate the usual parameters proposed by the American Association of Physicists in Medicine, the specific contribution to the dose rate of a usually not considered factor was investigated under a statistical approach: end-weld thickness variation, which is important due to this source being welded by an in-house method. Its effects were investigated using the Monte Carlo radiation transport code MCNP4C and an in-house routine programmed with MATLAB® to analyze the data. Final results are presented as a mean value for dose rate at different points of interest and their associated standard deviations. The results are discussed based on the influence of said parameter on different points around the source.
ABREU, J.C.; LAPOLLI, A.L.; PENDL JUNIOR, W.; CRUZ, M.T.F.. Desenvolvimento da tecnica de disposicao molecular para producao de fontes beta e de eletrons de conversao. In: 5o. CONGRESSO GERAL DE ENERGIA NUCLEAR, 28 de agosto - 2 de setembro, 1994, Rio de Janeiro, RJ.
1994. p. 227-229.
ANTUNES, PAULA C.G.; SIQUEIRA, PAULO de T.D.; YORIYAZ, HELIO; FONSECA, GABRIEL P.; REIS, GABRIELA; FURNARI, LAURA. Reconstruction of segmented human voxel phantoms for skin dosimetry. In: INTERNATIONAL NUCLEAR ATLANTIC CONFERENCE; MEETING ON NUCLEAR APPLICATIONS, 9th; MEETING ON REACTOR PHYSICS AND THERMAL HYDRAULICS, 16th; MEETING ON NUCLEAR INDUSTRY, 1st, September 27 - October 2, 2009, Rio de Janeiro, RJ. Proceedings... Sao Paulo: ABEN, 2009, 2009.
SILVA, GRACIETE S. de A. e; MURA, LUIS F.L.; FUGA, RINALDO; SANTOS, ADIMIR dos. IPEN/MB-01 reactor experiments with nickel reflectors. In: INTERNATIONAL NUCLEAR ATLANTIC CONFERENCE, October 21-25, 2019, Santos, SP. Proceedings... Rio de Janeiro: Associação Brasileira de Energia Nuclear, 2019. p. 4350-4361.Abstract: In the validation and verification processes of calculation methodologies and associated nuclear data libraries, the existence of experiments that can be considered benchmarks is of fundamental importance. For this purpose, a set of experiments with heavy material nuclear reflector was performed in the IPEN/MB-01 reactor using nickel plates properly inserted in the west face of the reactor core. A total of 32 plates around 3 mm thick were used in the experiment. The axial width and length were sufficient to cover the entire active reactor core. For each plate placement step, reactivity measurements were made due to their insertion in the core; as well as of the critical position of the equally removed BC1 and BC2 control rods. It could be observed that the increase of neutron absorption and consequent decrease of neutron moderation dominated the whole physics of the problem when few plates of reflective material were inserted (about 3 plates). Thereafter, neutron reflection became important overcoming neutron absorption; the reactivity increased until it surpassed the situation without plate (excess reactivity zero) obtaining an increase (net gain) of reactivity with the 32 plates inserted (about 295 pcm). Therefore, it was observed that the reflected nucleus became more reactive than the nucleus without reflective material. The theoretical analysis using MCNP-5 and ENDF/B-VII.0 nuclear data library showed the physical aspects of neutron absorption and reflection in the heavy reflector considered; however, it presented a discrepancy when fast neutron reflection dominates the physical phenomenon of neutron transport. In order to verify the impact of other models of thermal scattering of hydrogen in water for the computational simulations of the experiments, three models were considered, besides the one used by the ENDF/B-VII.0 library: ENDF/B-VII.0 scattering law; new evaluation of the S (alpha, beta) for hydrogen bound in water performed in Bariloche Atomic Center, Argentina; and the calculated with new released evaluations for (235)U, (238)U and (16)O.
JORGE, ANA E.S.; CAMPOS, CAROLINA P.; FREITAS, ANDERSON Z. de; BAGNATO, VANDERLEI S.. Photodynamic therapy induces epidermal thickening in hairless mice skin: an optical coherence tomography assessment. In: IZATT, JOSEPH A. (Ed.); FUJIMOTO, JAMES G. (Ed.); TUCHIN, VALERY V. (Ed.) OPTICAL COHERENCE TOMOGRAPHY AND COHERENCE DOMAIN OPTICAL METHODS IN BIOMEDICINE, 18th, February 01, 2014, San Francisco, CA, USA. Proceedings... Bellingham, WA, USA: International Society for Optics and Photonics, 2014. p. 89343N-1 - 89343-3. (SPIE Proceedings Series, 8934).
DOI:
10.1117/12.2040443
Abstract: Photodynamic therapy (PDT) promotes skin improvement according to many practitioners, however the immediately in
vivo assessment of its response remains clinically inaccessible. As a non-invasive modality, optical coherence
tomography (OCT) has been shown a feasible optical diagnostic technique that provides images in real time, avoiding
tissue biopsies. For this reason, our investigation focused on evaluates the PDT effect on a rodent model by means of
OCT. Therefore, a normal hairless mouse skin has undergone a single-session PDT, which was performed with topical 5-
aminolevulinic acid (ALA) cream using a red (630 nm) light emitting diode (LED) which reached the light dose of 75
J/cm2. As the optical imaging tool, an OCT (930 nm) with axial resolution of 6.0 microns in air was used, generating
images with contact to the mouse skin before, immediately after, 24 hours, and 2 weeks after the correspondent
procedure. Our result demonstrates that, within 24 hours after ALA-PDT, the mouse skin from the PDT group has shown
epidermal thickness (ET), which has substantially increased after 2 weeks from the treatment day. Moreover, the skin
surface has become evener after ALA-PDT. Concluding, this investigation demonstrates that the OCT is a feasible and
reliable technique that allows real-time cross-sectional imaging of skin, which can quantify an outcome and predict
whether the PDT reaches its goal.
A pesquisa no RD utiliza os recursos de busca da maioria das bases de dados. No entanto algumas dicas podem auxiliar para obter um resultado mais pertinente.
✔ É possível efetuar a busca de um autor ou um termo em todo o RD, por meio do
Buscar no Repositório
, isto é, o termo solicitado será localizado em qualquer campo do RD. No entanto esse tipo de pesquisa não é recomendada a não ser que se deseje um resultado amplo e generalizado.
✔ A pesquisa apresentará melhor resultado selecionando um dos filtros disponíveis em
Navegar
✔ Os filtros disponíveis em
Navegar
tais como: Coleções, Ano de publicação, Títulos, Assuntos, Autores, Revista, Tipo de publicação são autoexplicativos. O filtro,
Autores IPEN
apresenta uma relação com os autores vinculados ao IPEN; o
ID Autor IPEN
diz respeito ao número único de identificação de cada autor constante no RD e sob o qual estão agrupados todos os seus trabalhos independente das variáveis do seu nome;
Tipo de acesso
diz respeito à acessibilidade do documento, isto é , sujeito as leis de direitos autorais, ID RT apresenta a relação dos relatórios técnicos, restritos para consulta das comunidades indicadas.
A opção
Busca avançada
utiliza os conectores da lógica boleana, é o melhor recurso para combinar chaves de busca e obter documentos relevantes à sua pesquisa, utilize os filtros apresentados na caixa de seleção para refinar o resultado de busca. Pode-se adicionar vários filtros a uma mesma busca.
Exemplo:
Buscar os artigos apresentados em um evento internacional de 2015, sobre loss of coolant, do autor Maprelian.
Autor: Maprelian
Título: loss of coolant
Tipo de publicação: Texto completo de evento
Ano de publicação: 2015
✔ Para indexação dos documentos é utilizado o Thesaurus do INIS, especializado na área nuclear e utilizado em todos os países membros da International Atomic Energy Agency – IAEA, por esse motivo, utilize os termos de busca de assunto em inglês; isto não exclui a busca livre por palavras, apenas o resultado pode não ser tão relevante ou pertinente.
✔ 95% do RD apresenta o texto completo do documento com livre acesso, para aqueles que apresentam o significa que e o documento está sujeito as leis de direitos autorais, solicita-se nesses casos contatar a Biblioteca do IPEN,
bibl@ipen.br
.
✔ Ao efetuar a busca por um autor o RD apresentará uma relação de todos os trabalhos depositados no RD. No lado direito da tela são apresentados os coautores com o número de trabalhos produzidos em conjunto bem como os assuntos abordados e os respectivos anos de publicação agrupados.
✔ O RD disponibiliza um quadro estatístico de produtividade, onde é possível visualizar o número dos trabalhos agrupados por tipo de coleção, a medida que estão sendo depositados no RD.
✔ Na página inicial nas referências são sinalizados todos os autores IPEN, ao clicar nesse símbolo será aberta uma nova página correspondente à aquele autor – trata-se da página do pesquisador.
✔ Na página do pesquisador, é possível verificar, as variações do nome, a relação de todos os trabalhos com texto completo bem como um quadro resumo numérico; há links para o Currículo Lattes e o Google Acadêmico ( quando esse for informado).
ATENÇÃO!
ESTE TEXTO "AJUDA" ESTÁ SUJEITO A ATUALIZAÇÕES CONSTANTES, A MEDIDA QUE NOVAS FUNCIONALIDADES E RECURSOS DE BUSCA FOREM SENDO DESENVOLVIDOS PELAS EQUIPES DA BIBLIOTECA E DA INFORMÁTICA.
O gerenciamento do Repositório está a cargo da Biblioteca do IPEN. Constam neste RI, até o presente momento 20.950 itens que tanto podem ser artigos de periódicos ou de eventos nacionais e internacionais, dissertações e teses, livros, capítulo de livros e relatórios técnicos. Para participar do RI-IPEN é necessário que pelo menos um dos autores tenha vínculo acadêmico ou funcional com o Instituto. Nesta primeira etapa de funcionamento do RI, a coleta das publicações é realizada periodicamente pela equipe da Biblioteca do IPEN, extraindo os dados das bases internacionais tais como a Web of Science, Scopus, INIS, SciElo além de verificar o Currículo Lattes. O RI-IPEN apresenta também um aspecto inovador no seu funcionamento. Por meio de metadados específicos ele está vinculado ao sistema de gerenciamento das atividades do Plano Diretor anual do IPEN (SIGEPI). Com o objetivo de fornecer dados numéricos para a elaboração dos indicadores da Produção Cientifica Institucional, disponibiliza uma tabela estatística registrando em tempo real a inserção de novos itens. Foi criado um metadado que contém um número único para cada integrante da comunidade científica do IPEN. Esse metadado se transformou em um filtro que ao ser acionado apresenta todos os trabalhos de um determinado autor independente das variáveis na forma de citação do seu nome.
A elaboração do projeto do RI do IPEN foi iniciado em novembro de 2013, colocado em operação interna em julho de 2014 e disponibilizado na Internet em junho de 2015. Utiliza o software livre Dspace, desenvolvido pelo Massachusetts Institute of Technology (MIT). Para descrição dos metadados adota o padrão Dublin Core. É compatível com o Protocolo de Arquivos Abertos (OAI) permitindo interoperabilidade com repositórios de âmbito nacional e internacional.
1. Portaria IPEN-CNEN/SP nº 387, que estabeleceu os princípios que nortearam a criação do RDI,
clique aqui.
2. A experiência do Instituto de Pesquisas Energéticas e Nucleares (IPEN-CNEN/SP) na criação de um Repositório Digital Institucional – RDI,
clique aqui.
O Repositório Digital do IPEN é um equipamento institucional de acesso aberto, criado com o objetivo de reunir, preservar, disponibilizar e conferir maior visibilidade à Produção Científica publicada pelo Instituto, desde sua criação em 1956.
Operando, inicialmente como uma base de dados referencial o Repositório foi disponibilizado na atual plataforma, em junho de 2015. No Repositório está disponível o acesso ao conteúdo digital de artigos de periódicos, eventos, nacionais e internacionais, livros, capítulos, dissertações, teses e relatórios técnicos.
A elaboração do projeto do RI do IPEN foi iniciado em novembro de 2013, colocado em operação interna em julho de 2014 e disponibilizado na Internet em junho de 2015. Utiliza o software livre Dspace, desenvolvido pelo Massachusetts Institute of Technology (MIT). Para descrição dos metadados adota o padrão Dublin Core. É compatível com o Protocolo de Arquivos Abertos (OAI) permitindo interoperabilidade com repositórios de âmbito nacional e internacional.
O gerenciamento do Repositório está a cargo da Biblioteca do IPEN. Constam neste RI, até o presente momento 20.950 itens que tanto podem ser artigos de periódicos ou de eventos nacionais e internacionais, dissertações e teses, livros, capítulo de livros e relatórios técnicos. Para participar do RI-IPEN é necessário que pelo menos um dos autores tenha vínculo acadêmico ou funcional com o Instituto. Nesta primeira etapa de funcionamento do RI, a coleta das publicações é realizada periodicamente pela equipe da Biblioteca do IPEN, extraindo os dados das bases internacionais tais como a Web of Science, Scopus, INIS, SciElo além de verificar o Currículo Lattes. O RI-IPEN apresenta também um aspecto inovador no seu funcionamento. Por meio de metadados específicos ele está vinculado ao sistema de gerenciamento das atividades do Plano Diretor anual do IPEN (SIGEPI). Com o objetivo de fornecer dados numéricos para a elaboração dos indicadores da Produção Cientifica Institucional, disponibiliza uma tabela estatística registrando em tempo real a inserção de novos itens. Foi criado um metadado que contém um número único para cada integrante da comunidade científica do IPEN. Esse metadado se transformou em um filtro que ao ser acionado apresenta todos os trabalhos de um determinado autor independente das variáveis na forma de citação do seu nome.